June 8, 2012

Lalaloopsy Cake & Cake Pops

How to make doll head cake balls and cake topper

It's been a long while since I last posted anything but I've been so busy and staying away from cake stuff for the past couple of months to just get caught up with life and everything.  At least for now, I'm back for a bit to share my latest creation and how I made these super adorable Lalaloopsy cake pops!

Do you know a Lalaloopsy?  Ha-ha, I have gotten to know these dolls really well lately.  They seem to be the biggest craze at the moment with little girls.  Even my 4-year-old has a long list of ones she wants!  I made a Lalaloopsy garden-themed cake with an assortment of Lalaloopsy cake pops for my niece's 9th birthday.  They were a huge hit and it was so cute seeing all the girls recognize and name each cake pop doll.

Cake pops that look like Lalaloopsy cake doll heads.

Lalaloopys Cake Pop Favors on the cake table.

Although these doll head cake pops were a challenge to figure out and time-consuming to make, they did turn out super cute and fun to eat!

Disclosure: This post may contain affiliate links and if you click on the link and purchase the item, I may receive an affiliate commission at no extra cost to you.

I've never been a big fan of cake pops.  They're mashed-up cake that is just too sweet and covered in a chocolate coating that I don't care for much, but kids seem to go crazy over them and they're gobbled up instantly at any party.  So, with the determination to make a cake pop that I would enjoy eating too, I bought a set of metal, Nordic Ware Donut Hole Cake Pop Pans so that the cake can be baked up into perfect circles without having to mash up cake in frosting then rolled into balls.  I LOVED using these pans! 

 Recipe recommendation for using with cake ball (or donut hole) pans.

Cake Pop Pan Baking Tip:  Use a cake box mix, substitute milk for water, and add an extra egg.

Using milk instead of water in a box mix makes for a better-tasting and higher-quality cake adding moisture while giving it a better structure for baking inside a shaped pan.  It also helps eliminate any eggy flavor in the cake batter with the addition of the extra egg.

To try different cake pop trays, I did bake some cake balls using a Silicone Non-Stick Cake Pop Pan but they didn't work great.  As the cake batter baked and expanded, the silicone could not hold its shape and a lot of the batter leaked out of the round cavities and into the seams.  The excess batter around the edges of each sphere was thick, and even after trimming the edges off, the balls were more oval-shaped rather than round spheres.  The cake ball itself was also very airy with a lot of large air pockets in them making them difficult to stay on popsicle sticks and dip into chocolate.  Overall, I did not like working with the cake balls made in silicone baking trays.
   
Failed cake balls made in silicone cake pop pan.
Silicone Cake Pops Tray Failure:
Batter leaked around the edges and the balls were not perfect spheres and had too many air pockets.

Sucessful cake balls made with no frosting and using metal cake pop or donut hole pans.
Metal Cake Pop Pan Success:
Perfect spheres with a dense crumb.  Very little batter leaked out around the edges.


The metal cake ball/donut hole pans worked so much better and since they clamped down tightly, very little batter escaped out and into the edges.  Any excess around the cake was easily trimmed off with a pair of kitchen shears.  The cake balls were firm, smooth, and perfectly round.  They were also easier to dip into chocolate versus the cake balls baked in silicone pans.

For the chocolate coating, I used vanilla Almond Bark with a little bit of Americolor Soft Gel Paste in a Copper Flesh Tone Color added to it to make them look closer to the same color as the dolls.  I do prefer dipping cake pops into almond bark versus candy melts.  Candy melts are a bit thicker and can only be tinted with candy colors (non-water based).  Almond bark melts into a perfect dipping consistency, is easy to tint and flavor, plus is easily found in grocery stores.

I did have some trouble getting the cake balls to stay attached to the popsicle sticks when dipping them.  The weight of the candy coating just tore the soft cake right off the stick!  I did chill the cake balls before dipping them but it didn't seem to help.  Basically, I ended up setting the cake ball down over a wire rack and spooned the candy coating around the cake ball.  Then I scooped the cake pop up with the help of a spoon, lightly twirled it and taped off the excess coating onto the side of a bowl, and set the cake pops over a piece of parchment paper using an egg carton to hold the sticks up at a 45-degree angle.

Drying cake pops 45 degree angle to make doll head favors.

I did try piping chocolate for the doll's hair but it just didn't look right.  Therefore, in an attempt to make their hair look exactly like on the actual dolls, I made them out of Marshmallow Fondant (MMF) - I love how they turned out!  Although each doll took an average of 20 minutes to decorate, it was worth it in the end.

Rolling MMF into ropes to make Lalaloopsy hair for cake pops.
Making Spot Splatter Splash's Hair

How to make Lalaloopsy Doll Hair in MMF:

First, roll out MMF into a long rope about 1/4-inch thick.  Next, slice it up into varying lengths (1 inch to 1 1/2- inches long).  Lightly score each rope a few times to look like strands of hair.  Using piping gel as glue, attach them one by one to the cake pop.  The piping gel sticks really well to chocolate and candy coatings - water will not work!

For the Piping Gel recipe, visit the bottom of my post HERE: Japanese Beetle Cake  

Pillow Featherbed Lalaloopsy in a Cake Pop
Pillow Featherbed Lalaloopsy Cake Pops

Adding details to Cake Pop Dolls:

Use a round piping tip to make the eye.  Use a larger, round piping tip to cut out the circle then use a slightly smaller round piping tip to make an impression inside the eye.  Then, use a toothpick or a thin tool, to punch out the button holes in each eye.  For the cheeks, roll out a very thin piece of fondant and with a round piping tip, cut out the cheeks.  You can also dust checks instead with petal dust.  If the petal dust won't stick, dust the surface first with a little bit of cornstarch to remove any oily residue from the candy coating.  The mouth and lashes are painted with a thin brush and black AmeriColor Gel.

Crumbs Sugar Cookie and Mittens Fluff 'n' Stuff Lalaloopsy Cake Pops
Crumbs Sugar Cookie and Mittens Fluff 'n' Stuff Lalaloopsy Cake Pops

Wrapping Cake Pops into Party Favors:

Each doll was individually wrapped in clear, Cellophane Treat Bags, heat sealed with an Impulse Sealer, then tied with curly ribbon and a satin bow.


Assortment of Lalaloopsy Doll Head Cake Pops

The Lalaloopsy dolls I made cake pops of are (named from front left to right), Spot Splatter Splash, Jewel Sparkles, Pillow Featherbed, Dot Starlight, Mittens Fluff 'n' Stuff, Crumbs Sugar Cookie, and Bea Spells-a-Lot.

By the time I finished decorating and bagging the cake pops, it was 4:00 a.m. and I still had the cake to cover and decorate.  So, this is the only photo taken of the cake process but at least it shows you the basic structure of the cake topper.

Supporting a big doll head for a cake topper with a boba straw.

The head of the topper is mashed-up cake rolled into a 1 3/4 inch sphere.  It's covered over in a 50/50 mix of modeling chocolate and MMF.  I inserted a popsicle stick into her head like a cake pop and for extra support (and since her head was heavy), I added a boba straw that ran down into the cake's baseboard and up into her head.  Her clothing was built in layers of ruffles with gum paste since by the time I started making her, the sun had already come up, the birds were chirping outside, and the party was to start in a few hours - I needed it to dry fast!

And here she is all completed... Blossom Flower Pots is her name.

Lalaloospy Cake Pop Cake Topper (closeup)

Blossom Flowerpots Lalaloospy Cake Pop Cake Topper
Blossom Flowerpots Lalaloopsy

Note her toes.  All the dolls' toes touch so I had to make her toes touch too!  The little details do really make a difference (wink)!

Each tree around the cake is stuffed with mini marshmallows to help make them look puffy.


Lalaloopsy logo customized for cake.

I also incorporated my niece's name into the Lalaloopsy label...Kayla-loopsy!  After my daughter saw this cake, she now wants the same theme for her 5th birthday next month.  I'm looking forward to making these cute dolls again!  Read about it HERE, Lalaloopsy Cake and Dessert Table (Toffee Cocoa Cuddles)

I did manage to get some sleep before the party...all 2 hours worth =)  My sister-in-law did make me one of her delicious cups of coffee to help me get through the day.  The things we go through to make a cake I tell ya!  But seeing the joy on the kid's faces and their eyes light up is well worth it.

Garden Themed Lalaloopsy Doll Cake

Lalaloospy Cake Pops and Cake

Toffee Cocoa Cuddles Lalaloopsy Cake
See my daughter's Lalaloopsy Themed Cake here:
Lalaloopsy Cake and Dessert Table (Toffee Cocoa Cuddles)

19 comments:

  1. What a beautiful cake!! Very detailed work, nicely done!

    ReplyDelete
  2. Oh MY Gosh!! LOVE LOVE LOVE!!! My daughter would go nuts for this cake! This is awesome. I've wanted to make the girls as cake pops but they look so complex, your description of them is great. I may give this a try.
    I've pinned them as well!

    ReplyDelete
  3. AnonymousJuly 07, 2012

    A*MAZING!!

    ReplyDelete
  4. How much fondant (lbs?) did you use for how many cake pops in the end? Thanks!

    ReplyDelete
    Replies
    1. It doesn't take much to decorate the dolls faces with - it's hard to guess how much I used since I make batches of fondant and use it to cover cakes with too. Maybe around 1/4 lb per dozen?

      Delete
  5. OMG!!! I’m so glad I found you on pinterest. Your a lifesaver!!! I’m doing this cake and the pops this Saturday, and I didn’t even know where to start thank you so much for this tutorial.

    ReplyDelete
  6. Thank You, My daughter is going to love me! I better start practicing now though:)

    ReplyDelete
  7. Really neat. Looked at a lot of sights. Appreciate that you gave tips and what worked. I prefer buttercream for taste, but want accuracy and "dolls". Will have to try, then if I don't like will just do mini loopsy dolls. Thanks again.

    ReplyDelete
  8. Wow...... Super cute! Thank you so much for this posting. I'm going to try these soon since my daughter is turning 4 in April and she is crazy about these dolls........ How do you make the bows for the hair??

    ReplyDelete
    Replies
    1. I used a mold that I made a while back for some Hello Kitty cupcake toppers: http://sugarsweetcakesandtreats.blogspot.com/2011/01/hello-kitty-cupcake-decorations-and.html

      Delete
  9. They came out so beautiful!

    Do you make them for sale as well? I'd love to order some from you. Please let me know.

    Thanks,
    -Aimee

    ReplyDelete
    Replies
    1. Hi Aimee,

      Send me an email (sugarsweetcakesandtreats@gmail.com. I can ship cake or cupcake decorations but haven't shipped actual cake pops yet.

      Delete
  10. Ok how did u do the eyes omg

    ReplyDelete
    Replies
    1. it's described up in the post. I used piping tips to cut them out.

      Delete
  11. wow stunning cake and a really welldone effort to share it with us,i really appriciate people who share their tallent to others.thank you for you time and effort to put this tutorial in the website,i really enjoy reading it...:))

    ReplyDelete
    Replies
    1. Thank you for the lovely compliment Rini Bloom and I'm glad you enjoy it =)

      Delete
  12. This are amazing love the cake and the cakepops are adorable i have a question how did u make the bows

    ReplyDelete
    Replies
    1. Thanks bonny. I made the bows using a mold I designed for some Hello Kitty Decorations as seen here: http://sugarsweetcakesandtreats.blogspot.com/search/label/Hello%20Kitty

      Delete